水基型滅火器的優點和不足介紹！
來源：http://www.xintli.net/ 日期：2022-04-03
使用水型滅火器時，無需倒置，有效時間長，耐復燃，雙重滅火。滅火后不會污染物體表面，局部水基滅火器可以減少對人體的傷害。
When using water type fire extinguisher, it does not need to be inverted, has long effective time, is resistant to re ignition and double fire extinguishing. The surface of the object will not be polluted after fire extinguishing, and local water-based fire extinguishers can reduce the harm to human body.
水基滅火器存在缺陷與干粉滅火器相比，水基滅火器重量較重，貨架期短于干粉滅火器。干粉滅火器可保存10年，水基滅火器可保存6年。而且水基滅火器的比傳統的干粉滅火器貴，100以內可以買到，100以內可以買到
Compared with the dry powder fire extinguisher, the dry powder fire extinguisher has shorter shelf life. Dry powder fire extinguishers can be stored for 10 years and water-based fire extinguishers can be stored for 6 years. Moreover, the price of water-based fire extinguishers is more expensive than traditional dry powder fire extinguishers. You can buy them within 100 and within 100
消火栓主要適用于初始火災時不易復燃的火源。消火栓可用于固體物質火、易燃液體火、可燃電器火、廚房油火等。可用于家庭、汽車、商務辦公等場合，實用性好。
The fire hydrant is mainly applicable to the fire source that is not easy to re ignite in the initial fire. Fire hydrants can be used for solid fire, flammable liquid fire, combustible electrical fire, kitchen oil fire, etc. It can be used in family, automobile, business office and other occasions with good practicability.
對于水基滅火器來說，它也是一種常見的滅火器，比干粉滅火器更好，只會更貴，應用范圍比干粉滅火器窄，是水基滅火器的優缺點和應用范圍知識。根據以下規定，滅火器的外觀標志應合格：
For water-based fire extinguisher, it is also a common fire extinguisher. It is better than dry powder fire extinguisher and will only be more expensive. Its application range is narrower than dry powder fire extinguisher. It is the advantages, disadvantages and application range of water-based fire extinguisher. The appearance mark of the fire extinguisher shall be qualified according to the following provisions:
消火栓上有發光標記，沒有明顯的缺陷和損壞，消火栓的位置可以消火栓的位置
There are luminous marks on the fire hydrant without obvious defects and damage. The position of the fire hydrant can be the same as that of the fire hydrant
檢查滅火器標志和銘牌的主要內容，包括滅火器名稱、型號、滅火劑類型、滅火等級、滅火類型、使用溫度、驅動氣體名稱和數量（壓力）、制造企業名稱、使用方法、再填充和日常維護。貼花平服，不脫落，不缺邊少字，無明顯褶皺，氣泡等缺陷。
Check the main contents of fire extinguisher signs and nameplates, including fire extinguisher name, model, fire extinguishing agent type, fire extinguishing grade, fire extinguishing type, service temperature, driving gas name and quantity (pressure), manufacturer name, use method, refilling and daily maintenance. The decal is flat, without falling off, missing edges and words, and without obvious wrinkles, bubbles and other defects.
長時間識別滅火器底圈或頸圈等無壓部位的水壓試驗壓力和生產日期，鋼印用于生產連續序號。
Identify the hydrostatic test pressure and production date of the non pressure parts such as the bottom ring or neck ring of the fire extinguisher for a long time, and the steel seal is used for the production of continuous serial numbers.
通過對二氧化碳滅火劑在瓶體上的肩部進行打孔，使鋼印清晰，排列整齊，成扇形排列，鋼印標記標注內容齊全
Through punching the shoulder of carbon dioxide fire extinguishing agent on the bottle body, the steel seal is clear, neatly arranged in a fan-shaped arrangement, and the marking contents of the steel seal are complete
●滅火器壓力指示板上有滅火劑使用標志(如水基滅火劑用S指示、干粉滅火劑用F指示、潔凈氣體滅火劑用J指示)；指示區和黃區分別標有重新充裝和超充b)手推式滅火器采用旋轉式槍械，槍身上有久標志，表明開啟方法外型檢測主要是檢測滅火器及其附件的機械加工質量、外型涂層質量、貼花質量，鹽城消防器材使用目測檢測滅火器外型涂層和電鍍件的表面質量。滅火器及其附件符合下列要求的外觀質量檢驗判定為合格不存在明顯缺陷和機械損傷，如滅火器筒及其掛鉤、支架等。產品外觀涂層顏色均勻，無裂紋、流痕、氣泡、劃痕、劃痕等現象；滅火器電鍍表面無氣泡、劃痕、劃痕等現象。
● the fire extinguisher pressure indicator board is marked with the use of fire extinguishing agent (e.g. s for water-based fire extinguishing agent, f for dry powder fire extinguishing agent and j for clean gas fire extinguishing agent); The indication area and the yellow area are marked with refill and overcharge respectively. B) the hand push fire extinguisher adopts a rotary gun, and there is a long-term mark on the gun body, indicating that the appearance detection of the opening method is mainly to detect the machining quality, appearance coating quality and decal quality of the fire extinguisher and its accessories. Yancheng fire fighting equipment uses visual inspection to detect the surface quality of the appearance coating and electroplated parts of the fire extinguisher. The appearance quality inspection of the fire extinguisher and its accessories meeting the following requirements is determined to be qualified, and there are no obvious defects and mechanical damage, such as the fire extinguisher barrel, its hook, support, etc. The product appearance and coating color shall be uniform without cracks, flow marks, bubbles, scratches, scratches and other phenomena; The electroplated surface of the fire extinguisher shall be free of bubbles, scratches, scratches and other phenomena.
Today is the wonderful content that Xiaobian brings to you. More wonderful content focuses on our website: Chuanxiao http://www.xintli.net
