消防泵的使用離不開潤滑油
來源：http://www.xintli.net/ 日期：2022-05-06
實際上大部分的設備都是需要潤滑油進行潤滑的，消防泵自然也不看例外，但并不是所有的潤滑油都對它有幫助。事實上，泵對潤滑油也有一定的要求，下面來看看。
In fact, most of the equipment is the need for lubricating oil, fire pump is not an exception, but not all lubricating oil is helpful to it. In fact, the pump also has certain requirements for lubricating oil, let's take a look.
消防泵通過機械運動達到增加水壓和輸送水的目的。和其他機械產品一樣，它的工作需要潤滑油來提供潤滑作用，否則干磨會造成泵故障作為應急設備，有些消防泵長期不工作，所以潤滑油對它來說尤為重要。
The fire pump achieves the purpose of increasing water pressure and conveying water through mechanical movement. Like other mechanical products, its work needs lubricating oil to provide lubrication, otherwise dry grinding will cause pump failure as emergency equipment, some fire pump does not work for a long time, so lubricating oil is particularly important for it.
一個好的泵消耗的潤滑油是比較低的，但這也取決于潤滑油本身的質量。消防泵潤滑油需要根據實際情況更換，原則有哪些？
A good pump consumes less lubricating oil, but it also depends on the quality of the lubricating oil itself. Fire pump lubricating oil needs to be replaced according to the actual situation, what are the principles?
過濾器切換到容器時，要有一個過濾器來防止雜質殘留。規定在泵的潤滑部位加油，但不能在其他部位加油。潤滑油的質量應保持清潔和無雜質，以防止無序加油或添加變質和不干凈的油。應該添加到消防泵額定值，不多也不少。
When the filter is switched to the container, have a filter to prevent impurities from remaining. It is stipulated to fuel the pump at the lubricating part, but not at other parts. The quality of lubricating oil should be kept clean and free of impurities to prevent disorderly refueling or adding bad and unclean oil. Should be added to the fire pump rating, no more, no less.
山東川消潤滑油太少會損害消防泵，潤滑油太多會浪費，不利于泵的正常運轉。會按照規定時間給泵添加潤滑油，避免長期不加油或不必要的頻繁加油。定期清洗加油部位。由于泵的磨損和使用中機油的逐漸變質，潤滑效果會受到影響。需要定期清洗潤滑部位，更換新的潤滑油。
Too little lubricating oil will damage the fire pump, too much lubricating oil will be wasted, not conducive to the normal operation of the pump. Lubricating oil will be added to the pump according to the specified time to avoid long-term no refueling or unnecessary frequent refueling. Clean the refueling area regularly. Due to the wear of the pump and the gradual deterioration of the oil in use, the lubrication effect will be affected. Need to clean the lubrication part regularly, replace the new lubricating oil.
檢查和補油方法也要了解到，取出少量的潤滑油作為樣品和新鮮的潤滑油進行比較，有能力的單位可考慮進行油質化驗，以確保油質合格。如果樣品看似云霧狀，那么可能是與水混合的結果，也就是大家常說的油乳化，此時應該更換潤滑油。
Check and fill oil method also want to understand, take out a small amount of lubricating oil as a sample and fresh lubricating oil for comparison, capable units can consider oil quality test, to ensure that the quality of oil qualified. If the sample looks like mist, it may be the result of mixing with water, which is often referred to as oil emulsification, and the lubricating oil should be replaced at this time.
Shandong Chuan fire pump is inseparable from the use of lubricating oil related content is so, if you have any problems to know, it is better to directly come to our website www.xintli.net consultation.
