Automatic start: When the fire extinguishing equipment is connected to the automatic fire alarm system, the heptafluoropropane gas fire extinguishing controller can automatically start in the event of a fire. After receiving the fire signal, the controller will cut off the non fire power supply connected to the fire area and start the fire extinguishing system.

手動啟動：當滅火設備未接入火災自動報警系統時，可以通過手動啟動按鈕啟動七氟丙烷氣體滅火設備。手動啟動按鈕通常位于設備附近或操作間內，方便人員操作。

Manual start: When the fire extinguishing equipment is not connected to the automatic fire alarm system, the heptafluoropropane gas fire extinguishing equipment can be started through the manual start button. The manual start button is usually located near the equipment or in the operation room, making it convenient for personnel to operate.

機械式應急啟動：在七氟丙烷氣體滅火控制器出現故障無法正常啟動時，可以通過按下機械式應急啟動按鈕啟動滅火設備。機械式應急啟動按鈕通常位于設備附近或操作間內，方便人員操作。

Mechanical emergency start: When the heptafluoropropane gas fire extinguishing controller fails to start normally, the fire extinguishing equipment can be started by pressing the mechanical emergency start button. The mechanical emergency start button is usually located near the equipment or in the operation room, making it convenient for personnel to operate.

七氟丙烷氣體滅火設備的啟動方式與設備的安裝位置、火災規模和環境條件有關。在使用七氟丙烷氣體滅火設備時，必須根據實際情況選擇合適的啟動方式，并按照使用說明書的要求進行操作。同時，在平時需要定期檢查和維護設備，確保其處于良好狀態，以便在火災發生時能夠及時有效地進行滅火。

The starting method of heptafluoropropane gas fire extinguishing equipment is related to the installation location, fire scale, and environmental conditions of the equipment. When using heptafluoropropane gas fire extinguishing equipment, it is necessary to choose a suitable starting method based on the actual situation and operate according to the requirements of the user manual. At the same time, regular inspections and maintenance of equipment are required to ensure that it is in good condition in order to effectively extinguish fires in a timely manner.