水流指示器的主要技術要求
來源：http://www.xintli.net/ 日期：2023-03-13
水流指示器它是用來直觀的去觀察管理介質流動情況的一個重要附件，它能夠起到隨時觀察氣體蒸汽這些介質的流動情況。在很多生產的里面他是一個不可以缺少的附件，它可以適用于自動噴水滅火系統，它能夠?qū)⑺|(zhì)的流向情況及時的以電信號的方式發送到電控箱里面，下面
川消小編主要簡單介紹一下水流指示器的主要技術要求。
The water flow indicator is an important accessory used to visually observe and manage the flow of media. It can observe the flow of gas and steam at any time. It is an indispensable accessory in many production. It can be applied to the automatic sprinkler system. It can send the flow direction of water quality to the electric cabinet in a timely manner in the form of electric signal. Next, Sichuan Xiaobian will briefly introduce the main technical requirements of the water flow indicator.
1、基本的工作要求
1. Basic job requirements
正常情況下對這種水流指示器，他的工作壓力要求在1.2兆帕左右。同時對他的延遲性能要求是可以調節的類型，一般需要經過試驗來根據實際情況確定它的延遲時間，這種情況下要求它的可調范圍是在兩秒到90秒之間可調節的一個狀態。
Under normal conditions, the working pressure of this water flow indicator is required to be around 1.2 MPa. At the same time, its delay performance is required to be adjustable. Generally, it needs to be tested to determine its delay time according to the actual situation. In this case, its adjustable range is required to be an adjustable state between two seconds and 90 seconds.
2、材質要求
2. Material requirements
將材質要求納入到技術要求里面也是有原因的，畢竟水流指示器他的工作范圍是很特殊的。沒有一定的耐腐蝕性能的材質制作，是不能夠確保它的靈敏度的。所以，需要確定這種材質具有很強的耐腐蝕性能，一般以非金屬材質為主要制作材料之一。
There is also a reason to include the material requirements into the technical requirements. After all, the working range of the water flow indicator is very special. It is impossible to ensure its sensitivity if it is made of materials without certain corrosion resistance. Therefore, it is necessary to confirm that this material has strong corrosion resistance, and generally non-metallic material is one of the main manufacturing materials.
3、抗沖擊能力
3. Impact resistance
正常情況下需要確保它的抗沖擊性能達到6.8J的沖擊之下，能夠確保零件不會發生松動。所以說在高強度的水流沖擊之下，發生斷裂的類型就不要考慮了。
Under normal circumstances, it is necessary to ensure that its impact resistance reaches 6.8J, which can ensure that the parts will not loose. Therefore, under the impact of high intensity water flow, the type of fracture should not be considered.
4、靈敏度
4. Sensitivity
對它的靈敏度要求還是比較高的，因為如果沒有很強的靈敏度，它是起不到及時將水質水流的情況給反映出來的。
The sensitivity requirement is relatively high, because without strong sensitivity, it cannot reflect the water quality and flow in time.
5、過載能力
5. Overload capacity
對它的過載能力要求是在一定的工作情況之下，組建不可以發生燒毀或者過熱或者坑點較多以及觸點粘合的現象。
The overload capacity requirement is that under certain working conditions, the assembly cannot be burnt or overheated, or there are many pits and contact adhesion.
因為水流指示器的特殊性，為了確保它在使用過程當中有能夠保持良好的靈敏度，所以對它的技術要求還是比較高的。只有滿足了上述這些基本的要求之下，才能夠被投入使用，也只有這樣才能夠確保它在使用過程當中發揮良好的性能要求。您對此有什么疑惑或者需求，可以隨時來聯系我們
http://www.xintli.net咨詢！
Because of the particularity of the water flow indicator, in order to ensure that it can maintain good sensitivity during use, the technical requirements for it are relatively high. Only when these basic requirements are met can it be put into use, and only in this way can it play a good role in the process of use. If you have any doubts or needs, please feel free to contact us http://www.xintli.net consulting service
