消防水霧噴頭的結構特點及維護價值
來源：http://www.xintli.net/ 日期：2022-05-20
滅火系統在撲救固體可燃性火災中起滅火、防火、阻隔、降溫、防暴、防火等作用。同時不會引起液體起火具有高飛濺、高電絕緣的特點，特別適用于撲救電氣設備和易燃液體引起的火災，保護工廠、、倉庫、配電室、大型變壓器。而消防水霧噴頭是自動噴水滅火系統中的重要部件。那么消防水霧噴頭的結構特點及維護價值
The fire extinguishing system plays the role of fire extinguishing, fire prevention, blocking, cooling, riot prevention and fire prevention in fighting solid combustible fires. At the same time, it will not cause liquid fire. It has the characteristics of high splash and high electrical insulation. It is especially suitable for extinguishing fires caused by electrical equipment and flammable liquids and protecting factories, shopping malls, warehouses, distribution rooms and large transformers. The fire spray nozzle is an important part of the automatic sprinkler system. Then the structural characteristics and maintenance value of fire spray nozzle
消防水霧噴頭的結構特點
Structural characteristics of fire spray nozzle
水霧噴頭結構的工作原理：水霧噴頭結構噴出的細水霧的形狀圍繞著噴頭。對于擴軸錐體，消防水霧噴頭結構的霧化角為錐頂角。 在一定水壓的作用下，直流水通過離心攪拌或沖擊原理分解成小水滴并噴出。
Working principle of water mist nozzle structure: the shape of fine water mist ejected from the water mist nozzle structure surrounds the nozzle. For the expanding cone, the atomization angle of the fire water spray nozzle structure is the cone apex angle. Under the action of certain water pressure, the direct water is decomposed into small water droplets and ejected through centrifugal stirring or impact principle.
水霧噴頭結構在安裝時可根據要求下垂或水平安裝。消防水霧噴頭結構外觀比較精致，機身主要采用銅合金材料，非常耐用的。水霧噴頭結構入口可根據使用的具體需要設置過濾網。在一定的水壓條件下，消防水霧噴頭的結構將水流迅速分解成納米級細水霧滴并噴出。
The water mist nozzle structure can be installed sagging or horizontally according to the requirements. The structure and appearance of the fire spray nozzle are relatively exquisite. The body is mainly made of copper alloy, which is very durable. Filter screen can be set at the inlet of water mist nozzle structure according to the specific needs of use. Under certain water pressure, the structure of fire water mist nozzle quickly decomposes the water flow into nano water mist droplets and ejects them.
覆蓋保護對象的外表面以促進蒸氣的稀釋和散發。 因此，消防水霧噴頭的結構可用于抑制火災，減少火災災害破壞并降低爆炸風險。 消防噴頭通常用于可燃液體火災、固體火災和電氣火災，以及保護性冷卻等。
Cover the outer surface of the protected object to promote the dilution and emission of steam. Therefore, the structure of fire spray nozzle can be used to suppress fire, reduce fire disaster damage and reduce explosion risk. Fire sprinkler is usually used for combustible liquid fire, solid fire and electrical fire, as well as protective cooling.
消防水霧噴頭的維護價值
Maintenance value of fire spray nozzle
川消水霧噴頭的主要作用是加強防火，如果缺乏日常維護，其滅火效果就會降低。的日常維護需要注意以下幾個方面。由于目前的消防設備是由現代計算機自動操作的，因此需要的技術人員。一些不的維修人員可能會因對消防設備不熟悉而造成維修不足。建立健全維修制度。維修人員必須建立維修檔案，每一個更換的零件都要有記錄。此外，值班人員還應檢查設備是否有故障，消防水源是否正常。
The main function of Chuanxiao water mist nozzle is to strengthen fire prevention. If there is no daily maintenance, its fire extinguishing effect will be reduced. Professional routine maintenance needs to pay attention to the following aspects. Since the current fire-fighting equipment is operated automatically by modern computers, professional technicians are needed. Some unprofessional maintenance personnel may be unfamiliar with fire-fighting equipment and cause insufficient maintenance. Establish and improve the maintenance system. Maintenance personnel must establish maintenance files and keep records of each replaced part. In addition, the personnel on duty shall also check whether the equipment is faulty and whether the fire water source is normal.
當今大多數建筑物中的防火設備會隨著時間的推移而老化，嚴重影響可靠性、可用性和有效性。這也是近年來火災事故頻發的原因之一。大家都認為，消防水霧噴頭只有在關鍵的時候才會使用，而且通常是放置在那里而不進行維護和檢查。這是一種錯誤的看法，因為如果沒有定期維護，當發生事故時，它可能無法發揮應有的作用。
Nowadays, the fire protection equipment in most buildings will age over time, which seriously affects the reliability, availability and effectiveness. This is also one of the reasons for the frequent occurrence of fire accidents in recent years. It is generally believed that the fire spray nozzle can only be used when it is critical, and it is usually placed there without maintenance and inspection. This is a wrong view, because without regular maintenance, it may not play its due role in case of accident.
消防水霧噴頭可以用于電器、液化氣罐、石油儲罐等場所的冷卻、控制和滅火。噴頭外觀精美，機身采用銅合金材質，經久耐用。噴頭可根據需要下垂、水平或任意角度安裝，可根據需要安裝在噴嘴入口處設置過濾器。更多相關內容就來關注我們網站
www.xintli.net吧。
Fire water spray nozzle can be used for cooling, control and fire extinguishing in electrical appliances, liquefied gas tanks, oil storage tanks and other places. The appearance of the nozzle is exquisite, and the body is made of copper alloy, which is durable. The nozzle can be installed in sagging, horizontal or any angle as required, and the filter can be installed at the inlet of the nozzle as required. For more information, please visit our website www.xintli.net Com.
