消防水泵接合器安裝后的操作方法
來源：http://www.xintli.net/ 日期：2023-02-03
消防水泵接合器是消防隊使用消防車從室外水源取水，向室內管網供水的接口。其作用為:建筑物遇大火消防用水不足時，可通過它將水送室內消防給水管網，補充消防用水量的不足;室內消防水泵發生故障時，消防車從室外消火栓取水，通過它將水送室內消防給水管網;室內消防用水不足，而消防水泵工作正常時，可通過它將水送到位于建筑物內的消防水池;室內消防水泵壓力不足時，可通過它將水送室內消防給水管網。
The fire pump adapter is the interface for the fire brigade to use the fire truck to take water from the outdoor water source and supply water to the indoor pipe network. Its function is: when the fire fighting water for the building is insufficient, it can be used to send water to the indoor fire fighting water supply network to supplement the shortage of fire fighting water; When the indoor fire pump fails, the fire truck takes water from the outdoor fire hydrant and sends it to the indoor fire water supply network through it; When the indoor fire water is insufficient and the fire pump works normally, it can send water to the fire pool located in the building; When the pressure of the indoor fire pump is insufficient, it can be used to send water to the indoor fire water supply network.
水泵接合器分地上式、地下式、墻壁式三類。
The water pump adapter is divided into three types: aboveground, underground and wall.
地上式水泵接合器，在一般情況下采用，其目標明顯使用方便;地下式水泵接合器，適用于寒冷地區和有美觀要求時，安裝在路面下，不占地方;墻壁式水泵接合器，使用較少，如采用時應安裝在實墻面。
The above-ground water pump adapter is generally used, and its objective is obvious and convenient to use; The underground water pump adapter is suitable for cold areas and aesthetic requirements. It is installed under the road without occupying space; The wall-type water pump adapter is rarely used. If it is used, it should be installed on the solid wall.
如何正確安裝消防水泵接合器呢?
川消廠家給出了具體實施步驟:
How to install the fire pump adapter correctly? The manufacturer of Sichuan Xiaoxiao has given specific implementation steps:
(1)聯接水泵接合器的管路應與生活用水管路分開，以防污染生活用水。
(1) The pipeline connecting the water pump adapter shall be separated from the domestic water pipeline to prevent pollution of domestic water.
(2)應安裝在消防車便于接近的人行道或非機動車行駛地段。
(2) It shall be installed on the sidewalk or non-motor vehicle driving section where the fire truck is easy to access.
(3)應設置指示其位置及與消火栓區別的固定標志。
(3) A fixed sign indicating its position and the difference from the fire hydrant shall be set.
(4)水泵接合器的組裝應按接口、本體、聯接管、止回閥、放空管、控制閥的順序進行。止回閥的安裝方向應注意消防用水從接合器進人系統。
(4) The water pump adapter shall be assembled in the order of interface, body, connecting pipe, check valve, vent pipe and control valve. The installation direction of the check valve should pay attention to the fire water entering the system from the adapter.
(5)墻壁式接合器安裝高度宜為1。1m，與墻面上的門、窗、孔、洞的凈距不應小于2。0m、且不應安裝在玻璃幕墻下。
(5) The installation height of wall adapter should be 1. 1m, the clear distance from the door, window, hole and hole on the wall shall not be less than 2. 0m, and should not be installed under the glass curtain wall.
建筑內都會有消防的裝備，但是如果消防裝備出現了故障，比如水壓不足或者水流不足的情況之下，就可以打開消防水泵結合器，將水輸入到室內的消防管網中，從而能夠水源不足或者水壓不足的情況。更多相關設備的事項就來我們網站
http://www.xintli.net/admin.php咨詢了解吧！
There will be fire-fighting equipment in the building, but if the fire-fighting equipment fails, such as insufficient water pressure or water flow, the fire pump combiner can be opened to input water into the indoor fire pipe network, so as to solve the problem of insufficient water supply or water pressure. For more equipment related matters, please visit our website http://www.xintli.net/admin.php Ask about it!
