川消氣體滅火系統優化設計的考慮
來源：http://www.xintli.net/ 日期：2022-12-09
我們都知道氣體滅火系統很復雜，不是有一個初步的圖紙就可以直接按原始圖紙采購了，還需要廠家進行進一步的優化設計。這不僅關系到后續的成本，還關系到氣體滅火系統能否順利通過驗收。那么，氣體滅火系統優化設計要從哪些方面考慮？
川消廠家為您解答。
As we all know, the gas fire extinguishing system is very complex. It is not necessary to purchase according to the original drawings without a preliminary drawing. The manufacturer needs to further optimize the design. This is not only related to the subsequent cost, but also related to the successful acceptance of the gas fire extinguishing system. So, what aspects should be considered in the optimization design of gas fire extinguishing system? The manufacturer of Chuanxiao will answer for you.
一、系統綜合性設計優化
1、 System comprehensive design optimization
想要將氣體滅火系統的功能優勢完全發揮出來，很重要的一個因素便是做好設計管理，保證每一個細節參數的準確性，為各設備構件的安裝施工提供可靠依據。
If you want to give full play to the functional advantages of the gas fire extinguishing system, an important factor is to do a good job in design management, ensure the accuracy of each detailed parameter, and provide a reliable basis for the installation and construction of each equipment component.
二、管網與噴嘴設計
2、 Pipe network and nozzle design
以七氟丙烷滅火系統為例，七氟丙烷在管道內是以壓縮氣體的形式進行輸送的，因為液體與氣體在管道內的摩擦阻力存在差異，在設計時就需要注意此因素造成管路內氣體竄流以及氣液分層流動問題的發生，尤其是在壓力條件不變的情況下，隨著管徑的增大問題發生的可能性越大。
Taking heptafluoropropane fire extinguishing system as an example, heptafluoropropane is transported in the form of compressed gas in the pipeline. Because there are differences in the friction resistance between liquid and gas in the pipeline, it is necessary to pay attention to the occurrence of gas channeling and gas-liquid stratified flow in the pipeline caused by this factor during design. Especially when the pressure conditions remain unchanged, the problem is more likely to occur with the increase of pipe diameter.
同時，統一防護區內的不同噴嘴，如果不按照統一滅火設計體積分?jǐn)?shù)以及噴放時間來設計，就會導致系統防護區實際滅火體積分?jǐn)?shù)在規定時間內無法達到設計的滅火體積分?jǐn)?shù)。
At the same time, if different nozzles in the unified protection zone are not designed according to the unified fire extinguishing design volume fraction and spraying time, the actual fire extinguishing volume fraction in the system protection zone will not reach the designed fire extinguishing volume fraction within the specified time.
進行設計時須要強調此方面的控制，保證各項參數的科學性，應結合實際情況對噴嘴特性參數以及主要部件當量長度值進行驗證，提高設計方案的科學性與可靠性。
During the design, it is necessary to emphasize the control of this aspect to ensure the scientificity of all parameters. The nozzle characteristic parameters and the equivalent length of main components should be verified according to the actual situation to improve the scientificity and reliability of the design scheme.
三、氣瓶設計
3、 Gas cylinder design
氣瓶是氣體滅火系統的存儲設備，具有存儲壓力高、使用數量大以及安裝密度大等特點，只有前期做好綜合性規劃設計，才能夠保證后期滅火系統的正常運行。
The gas cylinder is the storage equipment of the gas fire extinguishing system. It has the characteristics of high storage pressure, large number of use and large installation density. Only by making comprehensive planning and design in the early stage can the normal operation of the fire extinguishing system in the later stage be guaranteed.
This is the end of the discussion on the optimization design of Sichuan Fire Extinguishing Gas System. If you have any questions, please come to our website at any time http://www.xintli.net Ask about it!
