川消滅火器按其移動形式可分為幾種
來源：http://www.xintli.net/ 日期：2022-10-15
滅火器按其移動形式可分為幾種呢？
川消小編提醒您可分為兩種，即手提式滅火器、推車式滅火器。這兩種滅火器都屬于便攜式的消防設備，在建筑、醫療、生活等多領域都是常備的。它們也有不同的類型，主要是根據內部填充劑來分類，滅火劑不同的話，操作方式和使用范圍都是不一樣，因此須根據使用場合，來選擇適合的滅火器。
How many types of fire extinguishers can be classified according to their moving forms? Chuanxiao Xiaobian reminds you that there are two types, namely portable fire extinguisher and wheeled fire extinguisher. These two types of fire extinguishers belong to portable fire fighting equipment and are commonly available in construction, medical treatment, life and other fields. They also have different types, which are mainly classified according to the internal fillers. If the fire extinguishing agents are different, the operation mode and scope of use are different. Therefore, suitable fire extinguishers must be selected according to the use occasion.
1.滅火器在輸送和防止過程中，應防止倒放、曝曬以及觸碰腐蝕性物質。
1. During the transportation and prevention of fire extinguishers, they should be prevented from being placed upside down, exposed to the sun and touching corrosive substances.
2.滅火器的放置溫度應保持在零下10℃45℃之間。
2. The placing temperature of fire extinguisher shall be kept between - 10 ℃ and 45 ℃.
3.滅火器放置場地應保持干燥，防止因受潮而發生腐蝕。此外，還要防止陽光曝曬，否則會影響滅火器的日后使用。
3. The fire extinguisher storage site shall be kept dry to prevent corrosion due to moisture. In addition, it is necessary to prevent sunlight exposure, otherwise it will affect the future use of the fire extinguisher.
4.滅火器須根據廠家規定，進行定時檢查。
4. The fire extinguisher must be checked regularly according to the manufacturer's regulations.
5.滅火器的壓力表無明顯的變形、損壞等現象，否則要換新的壓力表。
5. The pressure gauge of the fire extinguisher shall be free of obvious deformation, damage, etc., otherwise it shall be replaced with a new one.
6.查看一下壓力表指針在哪，若是不在綠區，則說明要充裝驅動氣體。
6. Check where the pointer of the pressure gauge is. If it is not in the green area, it means that the driving gas should be filled.
7.仔細看下滅火器的噴嘴有無變形、損壞等現象，否則需立即更換新的。
7. Check carefully whether the nozzle of the fire extinguisher is deformed or damaged, or replace it immediately.
8.滅火器的金屬件有無明顯的損傷、變形、銹蝕等現象，否則需立即更換。
8. Whether the metal parts of the fire extinguisher are obviously damaged, deformed, rusted, etc., or they need to be replaced immediately.
9.筒體或筒底發生變形、銹蝕等現象的，須采取報廢處理。
9. In case of deformation, corrosion and other phenomena of the cylinder or bottom, it shall be scrapped.
10.橡膠和塑料件無明顯變形、褪色或斷裂，否則需要立即更換。
10. The rubber and plastic parts shall be free of obvious deformation, fading or fracture, otherwise they shall be replaced immediately.
11.對于機構不合格的，須進行報廢處理。
11. The unqualified institutions must be scrapped.
After reading the above introduction, I believe you have a further understanding of the types of fire extinguishers according to their moving forms. For more information, please continue to follow our website http://www.xintli.net/ More wonderful content will be presented later.
