川消消防水泵接合器安裝的注意事項
來源：http://www.xintli.net/ 日期：2022-08-31
用作消防水泵的接合器分為地上式、地下式以及多用式，對于這種消防水泵來說，它的安裝需要特別注意，在接合器附近不得有任何的障礙物，一旦有障礙物，它會妨礙閥門位置的操作。下面主要簡單介紹一下，
川消消防水泵接合器在安裝的時候都有哪些注意事項。
Adapters used as fire pumps are divided into ground type, underground type and multi-purpose type. For such fire pumps, special attention shall be paid to the installation. There shall be no obstacles near the adapters. Once there are obstacles, it will hinder the operation of the valve position. The following is a brief introduction to the precautions for the installation of Chuanxiao fire pump adapter.
1、對性能的要求
1. Performance requirements
在安裝之前你要統一他的壓力，也就是他的工作壓力不得小于0.6兆帕。但是這個0.6兆帕是他的實驗壓力，正常情況下實驗壓力會是工作壓力的1.5倍。
Before installation, you should unify its pressure, that is, its working pressure should not be less than 0.6 MPa. However, this 0.6 MPa is his experimental pressure. Under normal circumstances, the experimental pressure will be 1.5 times the working pressure.
2、確保管道的通暢
2. Ensure the smoothness of the pipeline
安裝之前要對管道進行雜質以及焊渣的清理，確保消防管道里面已經進行過沖洗，這樣才能保證管道的暢通。很多安裝這種消防泵的人都知道，消防泵的質量是一回事，而管道是否通暢其實是非常重要的一個細節。
Before installation, the pipeline shall be cleaned of impurities and welding slag to ensure that the fire-fighting pipeline has been flushed, so as to ensure the smoothness of the pipeline. Many people who install this kind of fire pump know that the quality of the fire pump is one thing, and whether the pipeline is smooth is actually a very important detail.
3、安裝位置的標志要明顯
3. The installation position shall be clearly marked
用的消防水泵接合器的安裝位置，他要與消火栓的位置標志一樣，有明顯的標志。且要讓這個安裝位置的操作臺凸顯出來，在操作的時候提供的便捷性。同時像這種消防泵接合器在安裝的時候，它的周邊要確保沒有任何的障礙物，防止在人員操作的時候因為障礙物而影響到雙方發揮真正的作用。
The installation position of the fire pump adapter used shall be the same as that of the hydrant, with obvious signs. In addition, the console at this installation position should be highlighted to provide convenience during operation. At the same time, when installing the fire pump adapter, ensure that there are no obstacles around it, so as to prevent the real role of both parties from being affected by the obstacles during personnel operation.
4、安裝的時候要確保閥進行過定壓
4. During installation, ensure that the safety valve is under constant pressure
在對消防水泵進行安裝的時候，它的閥要進行定壓，定壓的好處是即便它放在很高的地方，也能夠確保水栓里面能夠保持長度的充實水柱。
When the fire pump is installed, its safety valve shall be subject to constant pressure. The advantage of constant pressure is that even if it is placed at a high place, it can ensure that the full water column can be maintained in the water hydrant.
以上就是消防水泵接合器在安裝的時候的一些注意事項，這些注意事項能夠確保消防水泵能夠在使用的時候更加順暢。尤其是為了確保使用時候的及時性，要在安裝之前對消防水泵進行定壓處理，定壓之后它能夠確保水栓保持10~15米的充實水柱。更多注意事項就來我們網站
http://www.xintli.net咨詢吧！
The above are some precautions for the installation of the fire pump adapter, which can ensure that the fire pump can be used more smoothly. In particular, in order to ensure the timeliness of use, the fire pump shall be subject to constant pressure treatment before installation. After constant pressure, it can ensure that the water hydrant can maintain 10-15m full water column. For more information, please visit our website http://www.xintli.net Consult!
