川消壓力比例混合裝置操作使用正確關重要
來源：http://www.xintli.net/ 日期：2022-07-07
如果我們倉庫的物料很多，為了減少這些產品的損失，我們這里不能著火，我們也建議您選擇使用壓力比例混合裝置進行安裝。不過對于沒有了解壓力比例混合裝置的企業來說，還是有一些疑惑，所以這里總結一個比較常見的問題，分享給大家。
If there are a lot of materials in our warehouse, in order to reduce the loss of these products, we can't catch fire here. We also suggest you choose to use the pressure proportional mixing device for installation. However, there are still some doubts for enterprises that do not know about pressure proportioning devices, so here is a common problem to share with you.
安裝此設備時，我們必須給它多少空間？其實這應該是很多人在購買這款設備的時候不得不考慮的一個問題，所以在這里我想告訴大家的是，這款設備的大小不用太擔心，因為這款產品適合空間要求相對較小。通常我們在選擇的時候，這個泡沫箱可能會占用比較大的空間，但是這個是根據我們需要的保護范圍來確定的，所以我們在購買的時候等待，您可以根據型號選擇。
When installing this device, how much space must we give it? In fact, this should be a problem that many people have to consider when buying this device, so here I want to tell you that there is no need to worry about the size of this device, because this product is suitable for relatively small space requirements. Usually, when we choose, this foam box may take up a large space, but this is determined according to the protection range we need, so we wait when we buy, and you can choose according to the model.
所以當我們選擇壓力比例混合裝置時，不要因為尺寸的問題而阻止我們選擇。我們使用此設備來減少財產損失。我們必須記住在此刻。我們之所以選擇壓力比例混合裝置，是因為該裝置在使用時發泡劑和水是分開的，每次使用都會混合，這樣可以減少我們使用過程中發泡劑的費用。
So when we choose the pressure proportional mixing device, don't stop us from choosing it because of the size. We use this equipment to reduce property damage. We must remember that at this moment. The reason why we choose the pressure proportional mixing device is that the foaming agent and water are separated when the device is used, and it will be mixed every time, which can reduce the cost of foaming agent in the process of our use.
但是
川消小編提醒大家要注意的是，每次使用的時候，都要檢查一下設備，以便下次更好的使用。通常，我們使用壓力比例混合裝置后，需要檢查設備的閥門是否正常關閉。并且在使用后，我們需要用水來清洗設備中的管道路。雖然設備的管道有相應的保護，但可以減少因使用發泡劑造成的沖刷。但是如果長時間不處理，就會出現問題。
But Chuanxiao Xiaobian reminds everyone to pay attention to the fact that every time you use it, you should check the equipment in order to use it better next time. Usually, after using the pressure proportioning device, we need to check whether the valve of the equipment is normally closed. And after use, we need water to clean the pipeline in the equipment. Although the pipelines of the equipment have corresponding protection, it can reduce the scouring caused by the use of foaming agent. But if it is not handled for a long time, problems will arise.
并且為了減少壓力式比例混合裝置中使用的發泡劑的問題，灌裝時要注意不要將不同種類的發泡劑混合在一起。和儲存泡沫時另外，請注意不要暴露在陽光直射下。壓力比例混合裝置之所以能用得好，對設備的正常運轉和對發泡液的產生關重要。所以在使用前后要注意這兩點。
And in order to reduce the problem of foaming agent used in the pressure proportional mixing device, attention should be paid not to mix different kinds of foaming agents together during filling. And when storing foam, please pay attention not to be exposed to direct sunlight. The reason why the pressure proportional mixing device can be used well is very important to the normal operation of the equipment and the production of foaming liquid. So pay attention to these two points before and after use.
The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.xintli.net And consult our staff, will serve you wholeheartedly.
