川消消防水炮通過驗收之前有要求
來源：http://www.xintli.net/ 日期：2022-06-05
消防水炮已廣泛應用于大型空間場所，如車間、工廠、倉庫、物流中心、車站、機場、體育館等。那么消防水炮的自動跟蹤、定位和噴灑在通過驗收之前，能滿足哪些要求呢？
Fire water monitors have been widely used in large space places, such as workshops, factories, warehouses, logistics centers, stations, airports, gymnasiums, etc. What requirements can the automatic tracking, positioning and spraying of fire water monitor meet before passing the acceptance?
消防水炮系統的型號、數量、壓力等參數符合圖紙標準要求。驗收人員驗收的依據之一是圖紙，因為圖紙經設計院設計后需經有關部門審查，審查合格后方可施工。
The model, quantity, pressure and other parameters of the fire water monitor system shall comply with the drawing standard requirements. One of the basis for acceptance by the acceptance personnel is the drawings, because the drawings shall be reviewed by relevant departments after being designed by the Design Institute, and the construction can be carried out only after passing the review.
驗收依據之一是完全按照圖紙進行施工，針對消防水炮系統的型號、數量和設計位置，以及消防水炮制造商的資質和消防水炮消防產品的識別標志。
One of the bases for acceptance is to carry out construction in full accordance with the drawings, with regard to the model, quantity and design position of the fire water monitor system, as well as the qualifications of the fire water monitor manufacturer and the identification marks of the fire water monitor fire products.
當檢驗壓力滿足標準要求時，需要模擬末端試水裝置或末端試水裝置。壓力表安裝在試水裝置的出口處。可通過壓力表檢查末端管道的壓力，以確定水炮的壓力達到額定值。
When the inspection pressure meets the standard requirements, it is necessary to simulate the end water test device or the end water test device. The pressure gauge is installed at the outlet of the water test device. The pressure of the end pipe can be checked by the pressure gauge to ensure that the pressure of the water cannon reaches the rated value.
消防水炮的重要功能是噴水滅火，這也是一個非常重要的環節。自動跟蹤定位噴水滅火不符合要求的，不予驗收。如果想讓智能消防水炮準確定位并滅火，消防水炮管道中的水壓和流量滿足智能消防水炮的要求，然后在保護半徑內點燃試驗火。
The important function of the fire water monitor is to spray water for fire extinguishing, which is also a very important link. If the automatic tracking and positioning sprinkler fails to meet the requirements, it shall not be accepted. If you want the intelligent fire water monitor to accurately locate and extinguish the fire, the water pressure and flow in the fire water monitor pipeline meet the requirements of the intelligent fire water monitor, and then ignite the test fire within the protection radius.
在自動狀態下，水炮應能自動定位火焰，自動打開閥門噴水，準確擊中火焰并熄滅火焰，水炮自動報警，并能自動聯動水泵等設備。所有這些都是正常的，這意味著該消防水炮的性能良好。
In the automatic state, the water monitor shall be able to automatically locate the flame, automatically open the valve to spray water, accurately hit the flame and extinguish the flame, the water monitor shall automatically give an alarm, and can automatically link the water pump and other equipment. All these are normal, which means that the fire water monitor has good performance.
川消提醒，在實際應用過程中，很多時候是不能燃燒汽油的，如何測試？在調試過程中，我們經常遇到小車點火和油漆桶點火的使用，這些非標準點火能否測試智能消防水炮的滅火性能？這些點火條件不能準確反映智能消防水炮的性能，但也可以測試消防水炮是否能自動檢測和定位火焰。
Chuanxiao reminded that in the process of practical application, gasoline cannot be burned many times. How to test? During commissioning, we often encounter the use of trolley ignition and paint bucket ignition. Can these non-standard ignition test the fire extinguishing performance of intelligent fire water monitors? These ignition conditions can not accurately reflect the performance of the intelligent fire water monitor, but can also test whether the fire water monitor can automatically detect and locate the flame.
根據當地驗收規范、自動噴水滅火系統和消防給水系統進行驗收。因此，消防水炮能滿足設計要求，準確噴水滅火。您有需求要選購的話就來我們網站
www.xintli.net關注吧！
The acceptance shall be conducted according to the local acceptance specifications, automatic sprinkler system and fire water supply system. Therefore, the fire water monitor can meet the design requirements and spray water accurately to extinguish the fire. If you need to purchase, please come to our website www.cx-fire Com follow!
