川消氣體滅火系統應用即使用的相關信息
來源：http://www.xintli.net/ 日期：2022-06-04
氣體滅火系統是警器、手自動轉換開關等產品，集火災報警、氣體滅火功能于一體，滿足相關型號的要求，控制器內置氣體滅火區控模塊，可分別控制各區氣體滅火設備，顯示工作狀態，工作可靠，性能穩定，使用方便，可廣泛用于各類氣體滅火工程。
The gas fire extinguishing system is an alarm, manual and automatic change-over switch and other products, which integrates the functions of fire alarm and gas fire extinguishing, and meets the requirements of relevant models. The controller has a built-in gas fire extinguishing area control module, which can control the gas fire extinguishing equipment in each area respectively, display the working status, work reliably, have stable performance, and are easy to use. It can be widely used in various gas fire extinguishing projects.
川消氣體滅火系統應選用靈敏度級別高的火災探測器，做到早報警，早滅火。保護區域應選擇兩種不同類型的火災探測器，通常為感煙火災探測器和感溫火災探測器。其他類型的火災探測器或手動報警按鈕也可用于特殊場所。各種探測器的保護面積應按規范要求交叉計算布置。
The gas fire extinguishing system shall select fire detectors with high sensitivity to achieve early alarm and early fire extinguishing. Two different types of fire detectors shall be selected for the protection area, usually smoke fire detector and temperature fire detector. Other types of fire detectors or manual alarm buttons can also be used in special places. The protection area of various detectors shall be cross calculated and arranged according to the specification requirements.
對于其他類型僅輸出開關值信號的火災探測器，可通過繼電器模塊連接到報警電路。采用哪種火災探測器組合來提供“兩個”獨立的火災信號，必須根據保護區域和被保護對象的具體情況來選擇。
For other types of fire detectors that only output switch value signals, they can be connected to the alarm circuit through the relay module. Which combination of fire detectors is used to provide "two" independent fire signals must be selected according to the specific conditions of the protected area and the protected object.
例如，對于通信機房、計算機機房，一般采用溫度控制系統，將室溫保持在一定的范圍內；當發生火災時，保護區域的溫度不會在開始時迅速上升，煙霧探測器會迅速感知到。
For example, for the communication room and computer room, the temperature control system is generally used to keep the room temperature within a certain range; In case of fire, the temperature in the protection area will not rise rapidly at the beginning, and the smoke detector will quickly sense it.
在此類保護區域火災探測器的選擇和線路設計中，除考慮兩個獨立的溫煙信號的組合外，還可以考慮兩個獨立的煙信號的組合來提前滅火控制的啟動時間。
In the selection and circuit design of fire detectors in such protection areas, in addition to the combination of two independent warm smoke signals, the combination of two independent smoke signals can also be considered to advance the start time of fire control.
當然您在使用該系統的使用應當提前了解或者學習使用說明，這樣才能更好的進行工作，而且還能保障好周圍的，您可以關注我們網站
www.xintli.net了解更多信息！
Of course, you should know or learn the instructions before using the system, so that you can work better and ensure the safety around you. You can follow our website www.cx-fire Com learn more!
